#ifndef _BOARD_CONFIG_H_
|
#define _BOARD_CONFIG_H_
|
|
#include <driver/gpio.h>
|
#include <driver/uart.h>
|
#include <driver/spi_master.h>
|
|
#define AUDIO_INPUT_SAMPLE_RATE 24000
|
#define AUDIO_OUTPUT_SAMPLE_RATE 24000
|
#define AUDIO_INPUT_REFERENCE true
|
|
#define CORDEC_POWER_CTRL GPIO_NUM_48
|
|
#define POWER_CTRL GPIO_NUM_9
|
#define LED_G GPIO_NUM_43
|
#define SD_MISO GPIO_NUM_17
|
#define SD_SCK GPIO_NUM_16
|
#define SD_MOSI GPIO_NUM_38
|
|
#define AUDIO_I2S_GPIO_MCLK GPIO_NUM_42
|
#define AUDIO_I2S_GPIO_WS GPIO_NUM_39
|
#define AUDIO_I2S_GPIO_BCLK GPIO_NUM_40
|
#define AUDIO_I2S_GPIO_DIN_1 GPIO_NUM_15
|
#define AUDIO_I2S_GPIO_DIN_2 GPIO_NUM_3
|
#define AUDIO_I2S_GPIO_DOUT GPIO_NUM_41
|
|
#define AUDIO_CODEC_PA_PIN_1 GPIO_NUM_4
|
#define AUDIO_CODEC_PA_PIN_2 GPIO_NUM_15
|
#define AUDIO_CODEC_I2C_SDA_PIN GPIO_NUM_2
|
#define AUDIO_CODEC_I2C_SCL_PIN GPIO_NUM_1
|
#define AUDIO_CODEC_ES8311_ADDR ES8311_CODEC_DEFAULT_ADDR
|
#define AUDIO_CODEC_ES7210_ADDR ES7210_CODEC_DEFAULT_ADDR
|
|
#define BUILTIN_LED_GPIO GPIO_NUM_NC
|
#define BOOT_BUTTON_GPIO GPIO_NUM_0
|
#define VOLUME_UP_BUTTON_GPIO GPIO_NUM_NC
|
#define VOLUME_DOWN_BUTTON_GPIO GPIO_NUM_NC
|
|
#define DISPLAY_WIDTH 360
|
#define DISPLAY_HEIGHT 360
|
#define DISPLAY_MIRROR_X false
|
#define DISPLAY_MIRROR_Y false
|
#define DISPLAY_SWAP_XY false
|
|
#define QSPI_LCD_H_RES (360)
|
#define QSPI_LCD_V_RES (360)
|
#define QSPI_LCD_BIT_PER_PIXEL (16)
|
|
#define QSPI_LCD_HOST SPI2_HOST
|
#define QSPI_PIN_NUM_LCD_PCLK GPIO_NUM_18
|
#define QSPI_PIN_NUM_LCD_CS GPIO_NUM_14
|
#define QSPI_PIN_NUM_LCD_DATA0 GPIO_NUM_46
|
#define QSPI_PIN_NUM_LCD_DATA1 GPIO_NUM_13
|
#define QSPI_PIN_NUM_LCD_DATA2 GPIO_NUM_11
|
#define QSPI_PIN_NUM_LCD_DATA3 GPIO_NUM_12
|
#define QSPI_PIN_NUM_LCD_RST_1 GPIO_NUM_3
|
#define QSPI_PIN_NUM_LCD_RST_2 GPIO_NUM_47
|
#define QSPI_PIN_NUM_LCD_BL GPIO_NUM_44
|
|
#define UART1_TX_1 GPIO_NUM_6
|
#define UART1_TX_2 GPIO_NUM_5
|
#define UART1_RX_1 GPIO_NUM_5
|
#define UART1_RX_2 GPIO_NUM_4
|
#define TOUCH_PAD2_1 GPIO_NUM_NC
|
#define TOUCH_PAD2_2 GPIO_NUM_6
|
#define TOUCH_PAD1 GPIO_NUM_7
|
|
#define DISPLAY_OFFSET_X 0
|
#define DISPLAY_OFFSET_Y 0
|
|
#define TP_PORT (I2C_NUM_1)
|
#define TP_PIN_NUM_RST (GPIO_NUM_NC)
|
#define TP_PIN_NUM_INT (GPIO_NUM_10)
|
|
#define DISPLAY_BACKLIGHT_PIN QSPI_PIN_NUM_LCD_BL
|
#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false
|
|
#define TAIJIPI_ST77916_PANEL_BUS_QSPI_CONFIG(sclk, d0, d1, d2, d3, max_trans_sz) \
|
{ \
|
.data0_io_num = d0, \
|
.data1_io_num = d1, \
|
.sclk_io_num = sclk, \
|
.data2_io_num = d2, \
|
.data3_io_num = d3, \
|
.max_transfer_sz = max_trans_sz, \
|
}
|
|
#endif // _BOARD_CONFIG_H_
|
