#include "wifi_board.h"
|
#include "codecs/es8311_audio_codec.h"
|
#include "display/lcd_display.h"
|
#include "system_reset.h"
|
#include "application.h"
|
#include "button.h"
|
#include "config.h"
|
#include "led/single_led.h"
|
|
#include <esp_log.h>
|
#include <esp_lcd_panel_vendor.h>
|
#include <driver/i2c_master.h>
|
#include <esp_efuse_table.h>
|
#include <freertos/FreeRTOS.h>
|
#include <freertos/task.h>
|
#include "power_save_timer.h"
|
|
#include "assets/lang_config.h"
|
#include "power_manager.h"
|
|
#define TAG "GenJuTech_s3_1_54TFT"
|
|
class SparkBotEs8311AudioCodec : public Es8311AudioCodec {
|
private:
|
|
public:
|
SparkBotEs8311AudioCodec(void* i2c_master_handle, i2c_port_t i2c_port, int input_sample_rate, int output_sample_rate,
|
gpio_num_t mclk, gpio_num_t bclk, gpio_num_t ws, gpio_num_t dout, gpio_num_t din,
|
gpio_num_t pa_pin, uint8_t es8311_addr, bool use_mclk = true)
|
: Es8311AudioCodec(i2c_master_handle, i2c_port, input_sample_rate, output_sample_rate,
|
mclk, bclk, ws, dout, din,pa_pin, es8311_addr, use_mclk = true) {}
|
|
void EnableOutput(bool enable) override {
|
if (enable == output_enabled_) {
|
return;
|
}
|
if (enable) {
|
Es8311AudioCodec::EnableOutput(enable);
|
} else {
|
// Nothing todo because the display io and PA io conflict
|
}
|
}
|
};
|
|
class GenJuTech_s3_1_54TFT : public WifiBoard {
|
private:
|
// i2c_master_bus_handle_t display_i2c_bus_;
|
Button boot_button_;
|
Button volume_up_button_;
|
Button volume_down_button_;
|
LcdDisplay* display_;
|
i2c_master_bus_handle_t codec_i2c_bus_;
|
PowerSaveTimer* power_save_timer_;
|
PowerManager* power_manager_;
|
|
void InitializePowerManager() {
|
power_manager_ = new PowerManager(GPIO_NUM_16);
|
power_manager_->OnChargingStatusChanged([this](bool is_charging) {
|
if (is_charging) {
|
power_save_timer_->SetEnabled(false);
|
} else {
|
power_save_timer_->SetEnabled(true);
|
}
|
});
|
}
|
|
void InitializePowerSaveTimer() {
|
// 第一个参数不为 -1 时，进入睡眠会关闭音频输入
|
power_save_timer_ = new PowerSaveTimer(240, 60);
|
power_save_timer_->OnEnterSleepMode([this]() {
|
GetDisplay()->SetPowerSaveMode(true);
|
});
|
power_save_timer_->OnExitSleepMode([this]() {
|
GetDisplay()->SetPowerSaveMode(false);
|
});
|
power_save_timer_->SetEnabled(true);
|
}
|
|
void InitializeCodecI2c() {
|
// Initialize I2C peripheral
|
i2c_master_bus_config_t i2c_bus_cfg = {
|
.i2c_port = I2C_NUM_0,
|
.sda_io_num = AUDIO_CODEC_I2C_SDA_PIN,
|
.scl_io_num = AUDIO_CODEC_I2C_SCL_PIN,
|
.clk_source = I2C_CLK_SRC_DEFAULT,
|
.glitch_ignore_cnt = 7,
|
.intr_priority = 0,
|
.trans_queue_depth = 0,
|
.flags = {
|
.enable_internal_pullup = 1,
|
},
|
};
|
ESP_ERROR_CHECK(i2c_new_master_bus(&i2c_bus_cfg, &codec_i2c_bus_));
|
}
|
|
void InitializeSpi() {
|
spi_bus_config_t buscfg = {};
|
buscfg.mosi_io_num = DISPLAY_SDA;
|
buscfg.miso_io_num = GPIO_NUM_NC;
|
buscfg.sclk_io_num = DISPLAY_SCL;
|
buscfg.quadwp_io_num = GPIO_NUM_NC;
|
buscfg.quadhd_io_num = GPIO_NUM_NC;
|
buscfg.max_transfer_sz = DISPLAY_WIDTH * DISPLAY_HEIGHT * sizeof(uint16_t);
|
ESP_ERROR_CHECK(spi_bus_initialize(SPI3_HOST, &buscfg, SPI_DMA_CH_AUTO));
|
}
|
|
void InitializeButtons() {
|
boot_button_.OnClick([this]() {
|
power_save_timer_->WakeUp();
|
auto& app = Application::GetInstance();
|
if (app.GetDeviceState() == kDeviceStateStarting) {
|
EnterWifiConfigMode();
|
return;
|
}
|
app.ToggleChatState();
|
});
|
// boot_button_.OnPressDown([this]() {
|
// Application::GetInstance().StartListening();
|
// });
|
// boot_button_.OnPressUp([this]() {
|
// Application::GetInstance().StopListening();
|
// });
|
|
volume_up_button_.OnClick([this]() {
|
power_save_timer_->WakeUp();
|
auto codec = GetAudioCodec();
|
auto volume = codec->output_volume() + 10;
|
if (volume > 100) {
|
volume = 100;
|
}
|
codec->SetOutputVolume(volume);
|
GetDisplay()->ShowNotification(Lang::Strings::VOLUME + std::to_string(volume));
|
});
|
|
volume_up_button_.OnLongPress([this]() {
|
power_save_timer_->WakeUp();
|
GetAudioCodec()->SetOutputVolume(100);
|
GetDisplay()->ShowNotification(Lang::Strings::MAX_VOLUME);
|
});
|
|
volume_down_button_.OnClick([this]() {
|
power_save_timer_->WakeUp();
|
auto codec = GetAudioCodec();
|
auto volume = codec->output_volume() - 10;
|
if (volume < 0) {
|
volume = 0;
|
}
|
codec->SetOutputVolume(volume);
|
GetDisplay()->ShowNotification(Lang::Strings::VOLUME + std::to_string(volume));
|
});
|
|
volume_down_button_.OnLongPress([this]() {
|
power_save_timer_->WakeUp();
|
GetAudioCodec()->SetOutputVolume(0);
|
GetDisplay()->ShowNotification(Lang::Strings::MUTED);
|
});
|
}
|
|
void InitializeSt7789Display() {
|
gpio_config_t config = {
|
.pin_bit_mask = (1ULL << DISPLAY_RES),
|
.mode = GPIO_MODE_OUTPUT,
|
.pull_up_en = GPIO_PULLUP_DISABLE,
|
.pull_down_en = GPIO_PULLDOWN_DISABLE,
|
.intr_type = GPIO_INTR_DISABLE,
|
};
|
ESP_ERROR_CHECK(gpio_config(&config));
|
gpio_set_level(DISPLAY_RES, 0);
|
vTaskDelay(20);
|
gpio_set_level(DISPLAY_RES, 1);
|
|
esp_lcd_panel_io_handle_t panel_io = nullptr;
|
esp_lcd_panel_handle_t panel = nullptr;
|
// 液晶屏控制IO初始化
|
ESP_LOGD(TAG, "Install panel IO");
|
esp_lcd_panel_io_spi_config_t io_config = {};
|
io_config.cs_gpio_num = DISPLAY_CS;
|
io_config.dc_gpio_num = DISPLAY_DC;
|
io_config.spi_mode = 3;
|
io_config.pclk_hz = 80 * 1000 * 1000;
|
io_config.trans_queue_depth = 10;
|
io_config.lcd_cmd_bits = 8;
|
io_config.lcd_param_bits = 8;
|
ESP_ERROR_CHECK(esp_lcd_new_panel_io_spi(SPI3_HOST, &io_config, &panel_io));
|
|
// 初始化液晶屏驱动芯片ST7789
|
ESP_LOGD(TAG, "Install LCD driver");
|
esp_lcd_panel_dev_config_t panel_config = {};
|
panel_config.reset_gpio_num = DISPLAY_RES;
|
panel_config.rgb_ele_order = LCD_RGB_ELEMENT_ORDER_RGB;
|
panel_config.bits_per_pixel = 16;
|
ESP_ERROR_CHECK(esp_lcd_new_panel_st7789(panel_io, &panel_config, &panel));
|
ESP_ERROR_CHECK(esp_lcd_panel_reset(panel));
|
ESP_ERROR_CHECK(esp_lcd_panel_init(panel));
|
ESP_ERROR_CHECK(esp_lcd_panel_swap_xy(panel, DISPLAY_SWAP_XY));
|
ESP_ERROR_CHECK(esp_lcd_panel_mirror(panel, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y));
|
ESP_ERROR_CHECK(esp_lcd_panel_invert_color(panel, true));
|
|
display_ = new SpiLcdDisplay(panel_io, panel,
|
DISPLAY_WIDTH, DISPLAY_HEIGHT, DISPLAY_OFFSET_X, DISPLAY_OFFSET_Y, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y, DISPLAY_SWAP_XY);
|
}
|
|
public:
|
GenJuTech_s3_1_54TFT() :
|
boot_button_(BOOT_BUTTON_GPIO),
|
volume_up_button_(VOLUME_UP_BUTTON_GPIO),
|
volume_down_button_(VOLUME_DOWN_BUTTON_GPIO) {
|
ESP_LOGI(TAG, "Initializing GenJuTech S3 1.54 Board");
|
InitializePowerManager();
|
InitializePowerSaveTimer();
|
InitializeCodecI2c();
|
InitializeSpi();
|
InitializeButtons();
|
InitializeSt7789Display();
|
GetBacklight()->RestoreBrightness();
|
}
|
|
virtual Led* GetLed() override {
|
static SingleLed led(BUILTIN_LED_GPIO);
|
return &led;
|
}
|
|
virtual AudioCodec* GetAudioCodec() override {
|
static SparkBotEs8311AudioCodec audio_codec(codec_i2c_bus_, I2C_NUM_0, AUDIO_INPUT_SAMPLE_RATE, AUDIO_OUTPUT_SAMPLE_RATE,
|
AUDIO_I2S_GPIO_MCLK, AUDIO_I2S_GPIO_BCLK, AUDIO_I2S_GPIO_WS, AUDIO_I2S_GPIO_DOUT, AUDIO_I2S_GPIO_DIN,
|
AUDIO_CODEC_PA_PIN, AUDIO_CODEC_ES8311_ADDR);
|
return &audio_codec;
|
}
|
|
virtual Display *GetDisplay() override {
|
return display_;
|
}
|
|
virtual Backlight* GetBacklight() override {
|
static PwmBacklight backlight(DISPLAY_BACKLIGHT_PIN, DISPLAY_BACKLIGHT_OUTPUT_INVERT);
|
return &backlight;
|
}
|
|
virtual bool GetBatteryLevel(int& level, bool& charging, bool& discharging) override {
|
static bool last_discharging = false;
|
charging = power_manager_->IsCharging();
|
discharging = power_manager_->IsDischarging();
|
if (discharging != last_discharging) {
|
power_save_timer_->SetEnabled(discharging);
|
last_discharging = discharging;
|
}
|
level = power_manager_->GetBatteryLevel();
|
return true;
|
}
|
|
virtual void SetPowerSaveLevel(PowerSaveLevel level) override {
|
if (level != PowerSaveLevel::LOW_POWER) {
|
power_save_timer_->WakeUp();
|
}
|
WifiBoard::SetPowerSaveLevel(level);
|
}
|
};
|
|
DECLARE_BOARD(GenJuTech_s3_1_54TFT);
|
