#include <driver/i2c_master.h>
|
#include <esp_lcd_panel_ops.h>
|
#include <esp_lcd_panel_vendor.h>
|
#include <esp_log.h>
|
|
#include "application.h"
|
#include "assets/lang_config.h"
|
#include "boards/common/wifi_board.h"
|
#include "button.h"
|
#include "codecs/no_audio_codec.h"
|
#include "config.h"
|
#include "display/oled_display.h"
|
#include "lamp_controller.h"
|
#include "led/single_led.h"
|
#include "mcp_server.h"
|
#include "system_reset.h"
|
|
#define TAG "Hu087Board"
|
|
class Hu087Board : public WifiBoard {
|
private:
|
i2c_master_bus_handle_t display_i2c_bus_;
|
esp_lcd_panel_io_handle_t panel_io_ = nullptr;
|
esp_lcd_panel_handle_t panel_ = nullptr;
|
Display* display_ = nullptr;
|
Button touch_button_;
|
|
void InitializeDisplayI2c() {
|
i2c_master_bus_config_t bus_config = {
|
.i2c_port = (i2c_port_t)0,
|
.sda_io_num = DISPLAY_SDA_PIN,
|
.scl_io_num = DISPLAY_SCL_PIN,
|
.clk_source = I2C_CLK_SRC_DEFAULT,
|
.glitch_ignore_cnt = 7,
|
.intr_priority = 0,
|
.trans_queue_depth = 0,
|
.flags =
|
{
|
.enable_internal_pullup = 1,
|
},
|
};
|
ESP_ERROR_CHECK(i2c_new_master_bus(&bus_config, &display_i2c_bus_));
|
}
|
|
void InitializeSsd1306Display() {
|
// SSD1306 config
|
esp_lcd_panel_io_i2c_config_t io_config = {
|
.dev_addr = 0x3C,
|
.on_color_trans_done = nullptr,
|
.user_ctx = nullptr,
|
.control_phase_bytes = 1,
|
.dc_bit_offset = 6,
|
.lcd_cmd_bits = 8,
|
.lcd_param_bits = 8,
|
.flags =
|
{
|
.dc_low_on_data = 0,
|
.disable_control_phase = 0,
|
},
|
.scl_speed_hz = 400 * 1000,
|
};
|
|
ESP_ERROR_CHECK(
|
esp_lcd_new_panel_io_i2c_v2(display_i2c_bus_, &io_config, &panel_io_));
|
|
ESP_LOGI(TAG, "Install SSD1306 driver");
|
esp_lcd_panel_dev_config_t panel_config = {};
|
panel_config.reset_gpio_num = -1;
|
panel_config.bits_per_pixel = 1;
|
|
esp_lcd_panel_ssd1306_config_t ssd1306_config = {
|
.height = static_cast<uint8_t>(DISPLAY_HEIGHT),
|
};
|
panel_config.vendor_config = &ssd1306_config;
|
|
ESP_ERROR_CHECK(
|
esp_lcd_new_panel_ssd1306(panel_io_, &panel_config, &panel_));
|
ESP_LOGI(TAG, "SSD1306 driver installed");
|
|
// Reset the display
|
ESP_ERROR_CHECK(esp_lcd_panel_reset(panel_));
|
if (esp_lcd_panel_init(panel_) != ESP_OK) {
|
ESP_LOGE(TAG, "Failed to initialize display");
|
display_ = new NoDisplay();
|
return;
|
}
|
|
// Set the display to on
|
ESP_LOGI(TAG, "Turning display on");
|
ESP_ERROR_CHECK(esp_lcd_panel_disp_on_off(panel_, true));
|
|
display_ = new OledDisplay(panel_io_, panel_, DISPLAY_WIDTH, DISPLAY_HEIGHT,
|
DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y);
|
}
|
|
void initializeAmpCtrl() {
|
gpio_config_t io_conf = {
|
.pin_bit_mask = (1ULL << AUDIO_I2S_SPK_GPIO_CTLR), // Select GPIO 2
|
.mode = GPIO_MODE_OUTPUT, // Set as output
|
.pull_up_en = GPIO_PULLUP_ENABLE, // Disable pull-up
|
.pull_down_en = GPIO_PULLDOWN_DISABLE, // Disable pull-down
|
.intr_type = GPIO_INTR_DISABLE // Disable interrupts
|
};
|
gpio_config(&io_conf);
|
gpio_set_level(AUDIO_I2S_SPK_GPIO_CTLR, 1);
|
};
|
|
void InitializeButtons() {
|
touch_button_.OnClick([this]() {
|
auto& app = Application::GetInstance();
|
if (app.GetDeviceState() == kDeviceStateStarting) {
|
EnterWifiConfigMode();
|
return;
|
}
|
app.ToggleChatState();
|
});
|
|
touch_button_.OnLongPress([this]() {
|
auto codec = GetAudioCodec();
|
auto volume = codec->output_volume() + 10;
|
if (volume > 100) {
|
volume = 100;
|
} // Need to implement logic to lower volume
|
codec->SetOutputVolume(volume);
|
GetDisplay()->ShowNotification(Lang::Strings::VOLUME +
|
std::to_string(volume));
|
});
|
}
|
|
public:
|
Hu087Board() : touch_button_(TOUCH_BUTTON_GPIO) {
|
InitializeDisplayI2c();
|
InitializeSsd1306Display();
|
InitializeButtons();
|
initializeAmpCtrl(); // Could control the amp ctrl pin throught voice
|
// detection i guess
|
}
|
|
virtual AudioCodec* GetAudioCodec() override {
|
static NoAudioCodecSimplex audio_codec(
|
AUDIO_INPUT_SAMPLE_RATE, AUDIO_OUTPUT_SAMPLE_RATE,
|
AUDIO_I2S_SPK_GPIO_BCLK, AUDIO_I2S_SPK_GPIO_LRCK,
|
AUDIO_I2S_SPK_GPIO_DOUT, I2S_STD_SLOT_RIGHT, AUDIO_I2S_MIC_GPIO_SCK,
|
AUDIO_I2S_MIC_GPIO_WS, AUDIO_I2S_MIC_GPIO_DIN, I2S_STD_SLOT_RIGHT);
|
return &audio_codec;
|
}
|
|
virtual Display* GetDisplay() override { return display_; }
|
};
|
|
DECLARE_BOARD(Hu087Board);
|
