#include "wifi_board.h"
|
#include "codecs/es8388_audio_codec.h"
|
#include "display/lcd_display.h"
|
#include "application.h"
|
#include "button.h"
|
#include "config.h"
|
#include "i2c_device.h"
|
#include "led/single_led.h"
|
|
#include <esp_log.h>
|
#include <esp_lcd_panel_vendor.h>
|
#include <driver/i2c_master.h>
|
#include <driver/spi_common.h>
|
|
#define TAG "labplus_ledong_v2"
|
|
#define BOARD_STM8_ADDR 17
|
#define BOARD_STM8_CMD 4
|
|
class labplus_ledong_v2 : public WifiBoard {
|
private:
|
i2c_master_bus_handle_t i2c_bus_;
|
Button boot_button_;
|
LcdDisplay* display_;
|
|
void InitializeI2c() {
|
// Initialize I2C peripheral
|
i2c_master_bus_config_t i2c_bus_cfg = {
|
.i2c_port = (i2c_port_t)I2C_NUM_0,
|
.sda_io_num = AUDIO_CODEC_I2C_SDA_PIN,
|
.scl_io_num = AUDIO_CODEC_I2C_SCL_PIN,
|
.clk_source = I2C_CLK_SRC_DEFAULT,
|
.glitch_ignore_cnt = 7,
|
.intr_priority = 0,
|
.trans_queue_depth = 0,
|
.flags = {
|
.enable_internal_pullup = 1,
|
},
|
};
|
ESP_ERROR_CHECK(i2c_new_master_bus(&i2c_bus_cfg, &i2c_bus_));
|
}
|
|
// Initialize spi peripheral
|
void InitializeSpi() {
|
spi_bus_config_t buscfg = {};
|
buscfg.mosi_io_num = LCD_MOSI_PIN;
|
buscfg.miso_io_num = GPIO_NUM_NC;
|
buscfg.sclk_io_num = LCD_SCLK_PIN;
|
buscfg.quadwp_io_num = GPIO_NUM_NC;
|
buscfg.quadhd_io_num = GPIO_NUM_NC;
|
buscfg.max_transfer_sz = DISPLAY_WIDTH * DISPLAY_HEIGHT * sizeof(uint16_t);
|
ESP_ERROR_CHECK(spi_bus_initialize(SPI2_HOST, &buscfg, SPI_DMA_CH_AUTO));
|
}
|
|
void InitializeButtons() {
|
boot_button_.OnClick([this]() {
|
auto& app = Application::GetInstance();
|
if (app.GetDeviceState() == kDeviceStateStarting) {
|
EnterWifiConfigMode();
|
return;
|
}
|
});
|
boot_button_.OnPressDown([this]() {
|
Application::GetInstance().StartListening();
|
});
|
boot_button_.OnPressUp([this]() {
|
Application::GetInstance().StopListening();
|
});
|
}
|
|
void InitializeJd9853Display() {
|
esp_lcd_panel_io_handle_t panel_io = nullptr;
|
esp_lcd_panel_handle_t panel = nullptr;
|
ESP_LOGD(TAG, "Install panel IO");
|
// 液晶屏控制IO初始化
|
esp_lcd_panel_io_spi_config_t io_config = {};
|
io_config.cs_gpio_num = LCD_CS_PIN;
|
io_config.dc_gpio_num = LCD_DC_PIN;
|
io_config.spi_mode = 0;
|
io_config.pclk_hz = 20 * 1000 * 1000;
|
io_config.trans_queue_depth = 7;
|
io_config.lcd_cmd_bits = 8;
|
io_config.lcd_param_bits = 8;
|
esp_lcd_new_panel_io_spi(SPI2_HOST, &io_config, &panel_io);
|
|
// 初始化液晶屏驱动芯片JD9853,使用ST7789驱动,时序和复位有调整。
|
ESP_LOGD(TAG, "Install LCD driver");
|
esp_lcd_panel_dev_config_t panel_config = {};
|
panel_config.reset_gpio_num = GPIO_NUM_NC;
|
panel_config.rgb_ele_order = LCD_RGB_ELEMENT_ORDER_RGB;
|
panel_config.bits_per_pixel = 16;
|
panel_config.data_endian = LCD_RGB_DATA_ENDIAN_BIG,
|
esp_lcd_new_panel_st7789(panel_io, &panel_config, &panel);
|
|
#if CONFIG_BOARD_TYPE_LABPLUS_LEDONG_V2
|
ESP_LOGI(TAG, "Reset LCD.");
|
i2c_device_config_t dev_cfg = {
|
.dev_addr_length = I2C_ADDR_BIT_LEN_7,
|
.device_address = BOARD_STM8_ADDR,
|
.scl_speed_hz = 400000,
|
};
|
|
i2c_master_dev_handle_t dev_handle;
|
i2c_master_bus_add_device(i2c_bus_, &dev_cfg, &dev_handle);
|
|
uint8_t reg = BOARD_STM8_CMD;
|
i2c_master_transmit(dev_handle, ®, 1, -1);
|
|
i2c_master_bus_rm_device(dev_handle);
|
#endif
|
|
esp_lcd_panel_reset(panel);
|
vTaskDelay(pdMS_TO_TICKS(100));
|
esp_lcd_panel_init(panel);
|
esp_lcd_panel_invert_color(panel, DISPLAY_BACKLIGHT_OUTPUT_INVERT);
|
esp_lcd_panel_swap_xy(panel, DISPLAY_SWAP_XY);
|
esp_lcd_panel_mirror(panel, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y);
|
display_ = new SpiLcdDisplay(panel_io, panel,
|
DISPLAY_WIDTH, DISPLAY_HEIGHT, DISPLAY_OFFSET_X, DISPLAY_OFFSET_Y, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y, DISPLAY_SWAP_XY);
|
}
|
|
public:
|
labplus_ledong_v2() : boot_button_(BOOT_BUTTON_GPIO) {
|
InitializeI2c();
|
InitializeSpi();
|
InitializeJd9853Display();
|
InitializeButtons();
|
GetBacklight()->SetBrightness(100);
|
}
|
|
virtual Led* GetLed() override {
|
static SingleLed led(BUILTIN_LED_GPIO);
|
return &led;
|
}
|
|
virtual AudioCodec* GetAudioCodec() override {
|
static Es8388AudioCodec audio_codec(
|
i2c_bus_,
|
I2C_NUM_0,
|
AUDIO_INPUT_SAMPLE_RATE,
|
AUDIO_OUTPUT_SAMPLE_RATE,
|
AUDIO_I2S_GPIO_MCLK,
|
AUDIO_I2S_GPIO_BCLK,
|
AUDIO_I2S_GPIO_WS,
|
AUDIO_I2S_GPIO_DOUT,
|
AUDIO_I2S_GPIO_DIN,
|
GPIO_NUM_NC,
|
AUDIO_CODEC_ES8388_ADDR
|
);
|
return &audio_codec;
|
}
|
|
virtual Display* GetDisplay() override {
|
return display_;
|
}
|
|
virtual Backlight* GetBacklight() override {
|
static PwmBacklight backlight(DISPLAY_BACKLIGHT_PIN, DISPLAY_BACKLIGHT_OUTPUT_INVERT);
|
return &backlight;
|
}
|
};
|
|
DECLARE_BOARD(labplus_ledong_v2);
|
