#ifndef _BOARD_CONFIG_H_
|
#define _BOARD_CONFIG_H_
|
|
// M5Stack Cardputer Adv Board configuration
|
// MCU: ESP32-S3FN8 (Stamp-S3A)
|
// Display: ST7789V2 1.14" 240x135
|
// Audio: ES8311 + NS4150B
|
|
#include <driver/gpio.h>
|
|
// Audio settings
|
#define AUDIO_INPUT_SAMPLE_RATE 24000
|
#define AUDIO_OUTPUT_SAMPLE_RATE 24000
|
|
// I2S Audio pins (ES8311)
|
#define AUDIO_I2S_GPIO_MCLK GPIO_NUM_NC
|
#define AUDIO_I2S_GPIO_BCLK GPIO_NUM_41 // SCLK
|
#define AUDIO_I2S_GPIO_WS GPIO_NUM_43 // LRCK
|
#define AUDIO_I2S_GPIO_DOUT GPIO_NUM_42 // DSDIN (MCU -> ES8311)
|
#define AUDIO_I2S_GPIO_DIN GPIO_NUM_46 // ASDOUT (ES8311 -> MCU)
|
|
// I2C pins (shared for ES8311, TCA8418, BMI270)
|
#define AUDIO_CODEC_I2C_SDA_PIN GPIO_NUM_8
|
#define AUDIO_CODEC_I2C_SCL_PIN GPIO_NUM_9
|
#define AUDIO_CODEC_ES8311_ADDR ES8311_CODEC_DEFAULT_ADDR
|
#define AUDIO_CODEC_PA_PIN GPIO_NUM_NC // NS4150B is always on
|
|
// Button
|
#define BOOT_BUTTON_GPIO GPIO_NUM_0
|
#define BUILTIN_LED_GPIO GPIO_NUM_NC
|
#define VOLUME_UP_BUTTON_GPIO GPIO_NUM_NC
|
#define VOLUME_DOWN_BUTTON_GPIO GPIO_NUM_NC
|
|
// Display ST7789V2 (SPI)
|
#define DISPLAY_WIDTH 240
|
#define DISPLAY_HEIGHT 135
|
#define DISPLAY_MIRROR_X true
|
#define DISPLAY_MIRROR_Y false
|
#define DISPLAY_SWAP_XY true
|
|
#define DISPLAY_OFFSET_X 40
|
#define DISPLAY_OFFSET_Y 53
|
|
#define DISPLAY_SPI_MOSI_PIN GPIO_NUM_35
|
#define DISPLAY_SPI_SCLK_PIN GPIO_NUM_36
|
#define DISPLAY_SPI_CS_PIN GPIO_NUM_37
|
#define DISPLAY_DC_PIN GPIO_NUM_34
|
#define DISPLAY_RST_PIN GPIO_NUM_33
|
#define DISPLAY_BACKLIGHT_PIN GPIO_NUM_38
|
#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false
|
|
// Keyboard TCA8418 I2C address and interrupt pin
|
#define KEYBOARD_TCA8418_ADDR 0x34
|
#define KEYBOARD_INT_PIN GPIO_NUM_11
|
|
// IMU BMI270 I2C address
|
#define IMU_BMI270_ADDR 0x68
|
|
#endif // _BOARD_CONFIG_H_
|
