#ifndef _BOARD_CONFIG_H_
|
#define _BOARD_CONFIG_H_
|
|
// Movecall Moji 2 configuration
|
|
#include <driver/gpio.h>
|
|
enum PowerSupply {
|
kDeviceTypecSupply,
|
kDeviceBatterySupply,
|
};
|
|
#define AUDIO_INPUT_SAMPLE_RATE 24000
|
#define AUDIO_OUTPUT_SAMPLE_RATE 24000
|
|
#define AUDIO_I2S_GPIO_MCLK GPIO_NUM_25
|
#define AUDIO_I2S_GPIO_WS GPIO_NUM_24
|
#define AUDIO_I2S_GPIO_BCLK GPIO_NUM_11
|
#define AUDIO_I2S_GPIO_DIN GPIO_NUM_12
|
#define AUDIO_I2S_GPIO_DOUT GPIO_NUM_23
|
|
#define AUDIO_CODEC_PA_PIN GPIO_NUM_5
|
#define AUDIO_CODEC_I2C_SDA_PIN GPIO_NUM_26
|
#define AUDIO_CODEC_I2C_SCL_PIN GPIO_NUM_27
|
#define AUDIO_CODEC_ES8311_ADDR ES8311_CODEC_DEFAULT_ADDR
|
|
#define BUILTIN_LED_GPIO GPIO_NUM_10
|
#define BOOT_BUTTON_GPIO GPIO_NUM_28
|
|
#define DISPLAY_WIDTH 360
|
#define DISPLAY_HEIGHT 360
|
#define DISPLAY_MIRROR_X false
|
#define DISPLAY_MIRROR_Y false
|
#define DISPLAY_SWAP_XY false
|
|
#define DISPLAY_OFFSET_X 0
|
#define DISPLAY_OFFSET_Y 0
|
|
#define DISPLAY_BACKLIGHT_PIN GPIO_NUM_2
|
#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false
|
|
#define DISPLAY_QSPI_H_RES (360)
|
#define DISPLAY_QSPI_V_RES (360)
|
#define DISPLAY_QSPI_BIT_PER_PIXEL (16)
|
|
#define DISPLAY_QSPI_HOST SPI2_HOST
|
#define DISPLAY_QSPI_SCLK_PIN GPIO_NUM_0
|
#define DISPLAY_QSPI_RESET_PIN GPIO_NUM_1
|
#define DISPLAY_QSPI_D0_PIN GPIO_NUM_9
|
#define DISPLAY_QSPI_D1_PIN GPIO_NUM_8
|
#define DISPLAY_QSPI_D2_PIN GPIO_NUM_7
|
#define DISPLAY_QSPI_D3_PIN GPIO_NUM_6
|
#define DISPLAY_QSPI_CS_PIN GPIO_NUM_3
|
|
|
#define DISPLAY_SPI_SCLK_HZ (40 * 1000 * 1000)
|
|
#define MOJI2_ST77916_PANEL_BUS_QSPI_CONFIG(sclk, d0, d1, d2, d3, max_trans_sz) \
|
{ \
|
.data0_io_num = d0, \
|
.data1_io_num = d1, \
|
.sclk_io_num = sclk, \
|
.data2_io_num = d2, \
|
.data3_io_num = d3, \
|
.max_transfer_sz = max_trans_sz, \
|
}
|
|
#endif // _BOARD_CONFIG_H_
|
