#ifndef _BOARD_CONFIG_H_
|
#define _BOARD_CONFIG_H_
|
|
#include <driver/gpio.h>
|
#include <driver/spi_master.h>
|
|
#define AUDIO_INPUT_SAMPLE_RATE 16000
|
#define AUDIO_OUTPUT_SAMPLE_RATE 24000
|
|
#define BOOT_BUTTON_GPIO GPIO_NUM_0
|
#define PWR_BUTTON_GPIO GPIO_NUM_6
|
#define PWR_Control_PIN GPIO_NUM_7
|
|
#define AUDIO_I2S_MIC_GPIO_WS GPIO_NUM_2
|
#define AUDIO_I2S_MIC_GPIO_SCK GPIO_NUM_15
|
#define AUDIO_I2S_MIC_GPIO_DIN GPIO_NUM_39
|
#define AUDIO_I2S_SPK_GPIO_DOUT GPIO_NUM_47
|
#define AUDIO_I2S_SPK_GPIO_BCLK GPIO_NUM_48
|
#define AUDIO_I2S_SPK_GPIO_LRCK GPIO_NUM_38
|
|
#define I2C_SCL_IO GPIO_NUM_10
|
#define I2C_SDA_IO GPIO_NUM_11
|
|
#define I2C_ADDRESS ESP_IO_EXPANDER_I2C_TCA9554_ADDRESS_000
|
|
#define DISPLAY_WIDTH 360
|
#define DISPLAY_HEIGHT 360
|
#define DISPLAY_MIRROR_X false
|
#define DISPLAY_MIRROR_Y false
|
#define DISPLAY_SWAP_XY false
|
|
#define QSPI_LCD_H_RES (360)
|
#define QSPI_LCD_V_RES (360)
|
#define QSPI_LCD_BIT_PER_PIXEL (16)
|
|
#define QSPI_LCD_HOST SPI2_HOST
|
#define QSPI_PIN_NUM_LCD_PCLK GPIO_NUM_40
|
#define QSPI_PIN_NUM_LCD_CS GPIO_NUM_21
|
#define QSPI_PIN_NUM_LCD_DATA0 GPIO_NUM_46
|
#define QSPI_PIN_NUM_LCD_DATA1 GPIO_NUM_45
|
#define QSPI_PIN_NUM_LCD_DATA2 GPIO_NUM_42
|
#define QSPI_PIN_NUM_LCD_DATA3 GPIO_NUM_41
|
#define QSPI_PIN_NUM_LCD_RST GPIO_NUM_NC
|
#define QSPI_PIN_NUM_LCD_BL GPIO_NUM_5
|
|
#define DISPLAY_OFFSET_X 0
|
#define DISPLAY_OFFSET_Y 0
|
|
#define TP_PORT (I2C_NUM_1)
|
#define TP_PIN_NUM_SDA (GPIO_NUM_1)
|
#define TP_PIN_NUM_SCL (GPIO_NUM_3)
|
#define TP_PIN_NUM_RST (GPIO_NUM_NC)
|
#define TP_PIN_NUM_INT (GPIO_NUM_4)
|
|
#define DISPLAY_BACKLIGHT_PIN QSPI_PIN_NUM_LCD_BL
|
#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false
|
|
#define TAIJIPI_ST77916_PANEL_BUS_QSPI_CONFIG(sclk, d0, d1, d2, d3, max_trans_sz) \
|
{ \
|
.data0_io_num = d0, \
|
.data1_io_num = d1, \
|
.sclk_io_num = sclk, \
|
.data2_io_num = d2, \
|
.data3_io_num = d3, \
|
.max_transfer_sz = max_trans_sz, \
|
}
|
|
|
#endif // _BOARD_CONFIG_H_
|
