DFRobot 行空板 K10

按键配置

• A：短按-打断/唤醒，长按1s-音量调大
• B：短按-打断/唤醒，长按1s-音量调小

编译配置命令

配置编译目标为 ESP32S3：

idf.py set-target esp32s3

打开 menuconfig：

idf.py menuconfig

选择板子：

Xiaozhi Assistant -> Board Type -> DFRobot 行空板 K10

修改 psram 配置：

Component config -> ESP PSRAM -> SPI RAM config -> Mode (QUAD/OCT) -> Octal Mode PSRAM

使能摄像头缓冲区大小端交换：

Xiaozhi Assistant -> Camera Configuration -> Enable software camera buffer endianness swapping

配置摄像头：
```
Component config -> Espressif Camera Sensors Configurations -> Camera Sensor Configuration -> Select and Set Camera Sensor -> GC2145 -> Auto detect GC2145

```
Component config -> Espressif Camera Sensors Configurations -> Camera Sensor Configuration -> Select and Set Camera Sensor -> GC2145 ->  Select default output format for DVP interface (RGB565 800x600 20fps, DVP 8-bit, 20M input) -> RGB565 800x600 20fps, DVP 8-bit, 20M input

编译：

idf.py build