* This appends an instruction to the builder to inject a default value * into the parsed result. This is especially useful in conjunction with * optional parts of the formatter. *
* For example, consider a formatter that parses the year, followed by * an optional month, with a further optional day-of-month. Using such a * formatter would require the calling code to check whether a full date, * year-month or just a year had been parsed. This method can be used to * default the month and day-of-month to a sensible value, such as the * first of the month, allowing the calling code to always get a date. *
* During formatting, this method has no effect. *
* During parsing, the current state of the parse is inspected. * If the specified field has no associated value, because it has not been * parsed successfully at that point, then the specified value is injected * into the parse result. Injection is immediate, thus the field-value pair * will be visible to any subsequent elements in the formatter. * As such, this method is normally called at the end of the builder. * * @param {TemporalField} field the field to default the value of, not null * @param {number} value the value to default the field to * @return {DateTimeFormatterBuilder} this, for chaining, not null */ parseDefaulting(field, value) { requireNonNull(field); this._appendInternal(new DefaultingParser(field, value)); return this; } /** * appendValue function overloading */ appendValue(){ if(arguments.length === 1){ return this._appendValue1.apply(this, arguments); } else if(arguments.length === 2){ return this._appendValue2.apply(this, arguments); } else { return this._appendValue4.apply(this, arguments); } } /** * Appends the value of a date-time field to the formatter using a normal * output style. * * The value of the field will be output during a print. * If the value cannot be obtained then an exception will be thrown. * * The value will be printed as per the normal print of an integer value. * Only negative numbers will be signed. No padding will be added. * * The parser for a variable width value such as this normally behaves greedily, * requiring one digit, but accepting as many digits as possible. * This behavior can be affected by 'adjacent value parsing'. * See {@link appendValue} for full details. * * @param field the field to append, not null * @return {DateTimeFormatterBuilder} this, for chaining, not null */ _appendValue1(field) { requireNonNull(field); this._appendValuePrinterParser(new NumberPrinterParser(field, 1, MAX_WIDTH, SignStyle.NORMAL)); return this; } /** * Appends the value of a date-time field to the formatter using a fixed * width, zero-padded approach. * * The value of the field will be output during a print. * If the value cannot be obtained then an exception will be thrown. * * The value will be zero-padded on the left. If the size of the value * means that it cannot be printed within the width then an exception is thrown. * If the value of the field is negative then an exception is thrown during printing. * * This method supports a special technique of parsing known as 'adjacent value parsing'. * This technique solves the problem where a variable length value is followed by one or more * fixed length values. The standard parser is greedy, and thus it would normally * steal the digits that are needed by the fixed width value parsers that follow the * variable width one. * * No action is required to initiate 'adjacent value parsing'. * When a call to {@link appendValue} with a variable width is made, the builder * enters adjacent value parsing setup mode. If the immediately subsequent method * call or calls on the same builder are to this method, then the parser will reserve * space so that the fixed width values can be parsed. * * For example, consider `builder.appendValue(YEAR).appendValue(MONTH_OF_YEAR, 2)`. * The year is a variable width parse of between 1 and 19 digits. * The month is a fixed width parse of 2 digits. * Because these were appended to the same builder immediately after one another, * the year parser will reserve two digits for the month to parse. * Thus, the text '201106' will correctly parse to a year of 2011 and a month of 6. * Without adjacent value parsing, the year would greedily parse all six digits and leave * nothing for the month. * * Adjacent value parsing applies to each set of fixed width not-negative values in the parser * that immediately follow any kind of variable width value. * Calling any other append method will end the setup of adjacent value parsing. * Thus, in the unlikely event that you need to avoid adjacent value parsing behavior, * simply add the `appendValue` to another {@link DateTimeFormatterBuilder} * and add that to this builder. * * If adjacent parsing is active, then parsing must match exactly the specified * number of digits in both strict and lenient modes. * In addition, no positive or negative sign is permitted. * * @param field the field to append, not null * @param width the width of the printed field, from 1 to 19 * @return this, for chaining, not null * @throws IllegalArgumentException if the width is invalid */ _appendValue2(field, width) { requireNonNull(field); if (width < 1 || width > MAX_WIDTH) { throw new IllegalArgumentException(`The width must be from 1 to ${MAX_WIDTH} inclusive but was ${width}`); } const pp = new NumberPrinterParser(field, width, width, SignStyle.NOT_NEGATIVE); this._appendValuePrinterParser(pp); return this; } /** * Appends the value of a date-time field to the formatter providing full * control over printing. * * The value of the field will be output during a print. * If the value cannot be obtained then an exception will be thrown. * * This method provides full control of the numeric formatting, including * zero-padding and the positive/negative sign. * * The parser for a variable width value such as this normally behaves greedily, * accepting as many digits as possible. * This behavior can be affected by 'adjacent value parsing'. * See {@link appendValue} for full details. * * In strict parsing mode, the minimum number of parsed digits is `minWidth`. * In lenient parsing mode, the minimum number of parsed digits is one. * * If this method is invoked with equal minimum and maximum widths and a sign style of * `NOT_NEGATIVE` then it delegates to `appendValue(TemporalField, int)`. * In this scenario, the printing and parsing behavior described there occur. * * @param field the field to append, not null * @param minWidth the minimum field width of the printed field, from 1 to 19 * @param maxWidth the maximum field width of the printed field, from 1 to 19 * @param signStyle the positive/negative output style, not null * @return {DateTimeFormatterBuilder} this, for chaining, not null * @throws IllegalArgumentException if the widths are invalid */ _appendValue4(field, minWidth, maxWidth, signStyle) { requireNonNull(field); requireNonNull(signStyle); if (minWidth === maxWidth && signStyle === SignStyle.NOT_NEGATIVE) { return this._appendValue2(field, maxWidth); } if (minWidth < 1 || minWidth > MAX_WIDTH) { throw new IllegalArgumentException(`The minimum width must be from 1 to ${MAX_WIDTH} inclusive but was ${minWidth}`); } if (maxWidth < 1 || maxWidth > MAX_WIDTH) { throw new IllegalArgumentException(`The minimum width must be from 1 to ${MAX_WIDTH} inclusive but was ${maxWidth}`); } if (maxWidth < minWidth) { throw new IllegalArgumentException(`The maximum width must exceed or equal the minimum width but ${maxWidth} < ${minWidth}`); } const pp = new NumberPrinterParser(field, minWidth, maxWidth, signStyle); this._appendValuePrinterParser(pp); return this; } /** * appendValueReduced function overloading */ appendValueReduced() { if (arguments.length === 4 && arguments[3] instanceof ChronoLocalDate) { return this._appendValueReducedFieldWidthMaxWidthBaseDate.apply(this, arguments); } else { return this._appendValueReducedFieldWidthMaxWidthBaseValue.apply(this, arguments); } } /** * Appends the reduced value of a date-time field to the formatter. * * Since fields such as year vary by chronology, it is recommended to use the * {@link appendValueReduced} date} * variant of this method in most cases. This variant is suitable for * simple fields or working with only the ISO chronology. * * For formatting, the `width` and `maxWidth` are used to * determine the number of characters to format. * If they are equal then the format is fixed width. * If the value of the field is within the range of the `baseValue` using * `width` characters then the reduced value is formatted otherwise the value is * truncated to fit `maxWidth`. * The rightmost characters are output to match the width, left padding with zero. * * For strict parsing, the number of characters allowed by `width` to `maxWidth` are parsed. * For lenient parsing, the number of characters must be at least 1 and less than 10. * If the number of digits parsed is equal to `width` and the value is positive, * the value of the field is computed to be the first number greater than * or equal to the `baseValue` with the same least significant characters, * otherwise the value parsed is the field value. * This allows a reduced value to be entered for values in range of the baseValue * and width and absolute values can be entered for values outside the range. * * For example, a base value of `1980` and a width of `2` will have * valid values from `1980` to `2079`. * During parsing, the text `"12"` will result in the value `2012` as that * is the value within the range where the last two characters are "12". * By contrast, parsing the text `"1915"` will result in the value `1915`. * * @param {TemporalField} field the field to append, not null * @param {number} width the field width of the printed and parsed field, from 1 to 10 * @param {number} maxWidth the maximum field width of the printed field, from 1 to 10 * @param {number} baseValue the base value of the range of valid values * @return {DateTimeFormatterBuilder} this, for chaining, not null * @throws IllegalArgumentException if the width or base value is invalid */ _appendValueReducedFieldWidthMaxWidthBaseValue(field, width, maxWidth, baseValue) { requireNonNull(field, 'field'); const pp = new ReducedPrinterParser(field, width, maxWidth, baseValue, null); this._appendValuePrinterParser(pp); return this; } /** * Appends the reduced value of a date-time field to the formatter. * * This is typically used for formatting and parsing a two digit year. * * The base date is used to calculate the full value during parsing. * For example, if the base date is 1950-01-01 then parsed values for * a two digit year parse will be in the range 1950-01-01 to 2049-12-31. * Only the year would be extracted from the date, thus a base date of * 1950-08-25 would also parse to the range 1950-01-01 to 2049-12-31. * This behavior is necessary to support fields such as week-based-year * or other calendar systems where the parsed value does not align with * standard ISO years. * * The exact behavior is as follows. Parse the full set of fields and * determine the effective chronology using the last chronology if * it appears more than once. Then convert the base date to the * effective chronology. Then extract the specified field from the * chronology-specific base date and use it to determine the * `baseValue` used below. * * For formatting, the `width` and `maxWidth` are used to * determine the number of characters to format. * If they are equal then the format is fixed width. * If the value of the field is within the range of the `baseValue` using * `width` characters then the reduced value is formatted otherwise the value is * truncated to fit `maxWidth`. * The rightmost characters are output to match the width, left padding with zero. * * For strict parsing, the number of characters allowed by `width` to `maxWidth` are parsed. * For lenient parsing, the number of characters must be at least 1 and less than 10. * If the number of digits parsed is equal to `width` and the value is positive, * the value of the field is computed to be the first number greater than * or equal to the `baseValue` with the same least significant characters, * otherwise the value parsed is the field value. * This allows a reduced value to be entered for values in range of the baseValue * and width and absolute values can be entered for values outside the range. * * For example, a base value of `1980` and a width of `2` will have * valid values from `1980` to `2079`. * During parsing, the text `"12"` will result in the value `2012` as that * is the value within the range where the last two characters are "12". * By contrast, parsing the text `"1915"` will result in the value `1915`. * * @param {TemporalField} field the field to append, not null * @param {number} width the field width of the printed and parsed field, from 1 to 10 * @param {number} maxWidth the maximum field width of the printed field, from 1 to 10 * @param {ChronoLocalDate} baseDate the base date used to calculate the base value for the range * of valid values in the parsed chronology, not null * @return {DateTimeFormatterBuilder} this, for chaining, not null * @throws IllegalArgumentException if the width or base value is invalid */ _appendValueReducedFieldWidthMaxWidthBaseDate(field, width, maxWidth, baseDate) { requireNonNull(field, 'field'); requireNonNull(baseDate, 'baseDate'); requireInstance(baseDate, ChronoLocalDate, 'baseDate'); const pp = new ReducedPrinterParser(field, width, maxWidth, 0, baseDate); this._appendValuePrinterParser(pp); return this; } /** * Appends a fixed width printer-parser. * * @param pp the printer-parser, not null * @return {DateTimeFormatterBuilder} this, for chaining, not null */ _appendValuePrinterParser(pp) { assert(pp != null); if (this._active._valueParserIndex >= 0 && this._active._printerParsers[this._active._valueParserIndex] instanceof NumberPrinterParser) { const activeValueParser = this._active._valueParserIndex; // adjacent parsing mode, update setting in previous parsers let basePP = this._active._printerParsers[activeValueParser]; if (pp.minWidth() === pp.maxWidth() && pp.signStyle() === SignStyle.NOT_NEGATIVE) { // Append the width to the subsequentWidth of the active parser basePP = basePP.withSubsequentWidth(pp.maxWidth()); // Append the new parser as a fixed width this._appendInternal(pp.withFixedWidth()); // Retain the previous active parser this._active._valueParserIndex = activeValueParser; } else { // Modify the active parser to be fixed width basePP = basePP.withFixedWidth(); // The new parser becomes the mew active parser this._active._valueParserIndex = this._appendInternal(pp); } // Replace the modified parser with the updated one this._active._printerParsers[activeValueParser] = basePP; } else { // The new Parser becomes the active parser this._active._valueParserIndex = this._appendInternal(pp); } return this; } //----------------------------------------------------------------------- /** * Appends the fractional value of a date-time field to the formatter. * * The fractional value of the field will be output including the * preceding decimal point. The preceding value is not output. * For example, the second-of-minute value of 15 would be output as `.25`. * * The width of the printed fraction can be controlled. Setting the * minimum width to zero will cause no output to be generated. * The printed fraction will have the minimum width necessary between * the minimum and maximum widths - trailing zeroes are omitted. * No rounding occurs due to the maximum width - digits are simply dropped. * * When parsing in strict mode, the number of parsed digits must be between * the minimum and maximum width. When parsing in lenient mode, the minimum * width is considered to be zero and the maximum is nine. * * If the value cannot be obtained then an exception will be thrown. * If the value is negative an exception will be thrown. * If the field does not have a fixed set of valid values then an * exception will be thrown. * If the field value in the date-time to be printed is invalid it * cannot be printed and an exception will be thrown. * * @param {TemporalField} field the field to append, not null * @param {Number} minWidth the minimum width of the field excluding the decimal point, from 0 to 9 * @param {Number} maxWidth the maximum width of the field excluding the decimal point, from 1 to 9 * @param {boolean} decimalPoint whether to output the localized decimal point symbol * @return {DateTimeFormatterBuilder} this, for chaining, not null * @throws IllegalArgumentException if the field has a variable set of valid values or * either width is invalid */ appendFraction(field, minWidth, maxWidth, decimalPoint) { this._appendInternal(new FractionPrinterParser(field, minWidth, maxWidth, decimalPoint)); return this; } /** * Appends an instant using ISO-8601 to the formatter with control over * the number of fractional digits. * * Instants have a fixed output format, although this method provides some * control over the fractional digits. They are converted to a date-time * with a zone-offset of UTC and printed using the standard ISO-8601 format. * The localized decimal style is not used. * * The {@link this.fractionalDigits} parameter allows the output of the fractional * second to be controlled. Specifying zero will cause no fractional digits * to be output. From 1 to 9 will output an increasing number of digits, using * zero right-padding if necessary. The special value -1 is used to output as * many digits as necessary to avoid any trailing zeroes. * * When parsing in strict mode, the number of parsed digits must match the * fractional digits. When parsing in lenient mode, any number of fractional * digits from zero to nine are accepted. * * The instant is obtained using {@link ChronoField#INSTANT_SECONDS} * and optionally (@code NANO_OF_SECOND). The value of {@link INSTANT_SECONDS} * may be outside the maximum range of {@link LocalDateTime}. * * The {@link ResolverStyle} has no effect on instant parsing. * The end-of-day time of '24:00' is handled as midnight at the start of the following day. * The leap-second time of '23:59:59' is handled to some degree, see * {@link DateTimeFormatter#parsedLeapSecond} for full details. * * An alternative to this method is to format/parse the instant as a single * epoch-seconds value. That is achieved using `appendValue(INSTANT_SECONDS)`. * * @param {number} [fractionalDigits=-2] - the number of fractional second digits to format with, * from 0 to 9, or -1 to use as many digits as necessary * @return {DateTimeFormatterBuilder} this, for chaining, not null */ appendInstant(fractionalDigits=-2) { if (fractionalDigits < -2 || fractionalDigits > 9) { throw new IllegalArgumentException(`Invalid fractional digits: ${fractionalDigits}`); } this._appendInternal(new InstantPrinterParser(fractionalDigits)); return this; } /** * Appends the zone offset, such as '+01:00', to the formatter. * * This appends an instruction to print/parse the offset ID to the builder. * This is equivalent to calling `appendOffset("HH:MM:ss", "Z")`. * * @return {DateTimeFormatterBuilder} this, for chaining, not null */ appendOffsetId() { this._appendInternal(OffsetIdPrinterParser.INSTANCE_ID); return this; } /** * Appends the zone offset, such as '+01:00', to the formatter. * * This appends an instruction to print/parse the offset ID to the builder. * * During printing, the offset is obtained using a mechanism equivalent * to querying the temporal with {@link TemporalQueries#offset}. * It will be printed using the format defined below. * If the offset cannot be obtained then an exception is thrown unless the * section of the formatter is optional. * * During parsing, the offset is parsed using the format defined below. * If the offset cannot be parsed then an exception is thrown unless the * section of the formatter is optional. * * The format of the offset is controlled by a pattern which must be one * of the following: * * * `+HH` - hour only, ignoring minute and second * * `+HHmm` - hour, with minute if non-zero, ignoring second, no colon * * `+HH:mm` - hour, with minute if non-zero, ignoring second, with colon * * `+HHMM` - hour and minute, ignoring second, no colon * * `+HH:MM` - hour and minute, ignoring second, with colon * * `+HHMMss` - hour and minute, with second if non-zero, no colon * * `+HH:MM:ss` - hour and minute, with second if non-zero, with colon * * `+HHMMSS` - hour, minute and second, no colon * * `+HH:MM:SS` - hour, minute and second, with colon * * The "no offset" text controls what text is printed when the total amount of * the offset fields to be output is zero. * Example values would be 'Z', '+00:00', 'UTC' or 'GMT'. * Three formats are accepted for parsing UTC - the "no offset" text, and the * plus and minus versions of zero defined by the pattern. * * @param {String} pattern the pattern to use, not null * @param {String} noOffsetText the text to use when the offset is zero, not null * @return {DateTimeFormatterBuilder} this, for chaining, not null */ appendOffset(pattern, noOffsetText) { this._appendInternalPrinterParser(new OffsetIdPrinterParser(noOffsetText, pattern)); return this; } /** * Appends the time-zone ID, such as 'Europe/Paris' or '+02:00', to the formatter. * * This appends an instruction to print/parse the zone ID to the builder. * The zone ID is obtained in a strict manner suitable for {@link ZonedDateTime}. * By contrast, {@link OffsetDateTime} does not have a zone ID suitable * for use with this method, see {@link appendZoneOrOffsetId}. * * During printing, the zone is obtained using a mechanism equivalent * to querying the temporal with {@link TemporalQueries#zoneId}. * It will be printed using the result of {@link ZoneId#getId}. * If the zone cannot be obtained then an exception is thrown unless the * section of the formatter is optional. * * During parsing, the zone is parsed and must match a known zone or offset. * If the zone cannot be parsed then an exception is thrown unless the * section of the formatter is optional. * * @return {DateTimeFormatterBuilder} this, for chaining, not null * @see #appendZoneRegionId() */ appendZoneId() { this._appendInternal(new ZoneIdPrinterParser(TemporalQueries.zoneId(), 'ZoneId()')); return this; } //----------------------------------------------------------------------- /** * Appends the elements defined by the specified pattern to the builder. * * All letters 'A' to 'Z' and 'a' to 'z' are reserved as pattern letters. * The characters '{' and '}' are reserved for future use. * The characters '[' and ']' indicate optional patterns. * The following pattern letters are defined: *
* |Symbol |Meaning |Presentation |Examples
* |--------|----------------------------|------------------|----------------------------------------------------
* | G | era | number/text | 1; 01; AD; Anno Domini
* | u | year | year | 2004; 04
* | y | year-of-era | year | 2004; 04
* | D | day-of-year | number | 189
* | M | month-of-year | number/text | 7; 07; Jul; July; J
* | d | day-of-month | number | 10
* | | | |
* | Q | quarter-of-year | number/text | 3; 03; Q3
* | Y | week-based-year | year | 1996; 96
* | w | week-of-year | number | 27
* | W | week-of-month | number | 27
* | e | localized day-of-week | number | 2; Tue; Tuesday; T
* | E | day-of-week | number/text | 2; Tue; Tuesday; T
* | F | week-of-month | number | 3
* | | | |
* | a | am-pm-of-day | text | PM
* | h | clock-hour-of-am-pm (1-12) | number | 12
* | K | hour-of-am-pm (0-11) | number | 0
* | k | clock-hour-of-am-pm (1-24) | number | 0
* | | | |
* | H | hour-of-day (0-23) | number | 0
* | m | minute-of-hour | number | 30
* | s | second-of-minute | number | 55
* | S | fraction-of-second | fraction | 978
* | A | milli-of-day | number | 1234
* | n | nano-of-second | number | 987654321
* | N | nano-of-day | number | 1234000000
* | | | |
* | V | time-zone ID | zone-id | America/Los_Angeles; Z; -08:30
* | z | time-zone name | zone-name | Pacific Standard Time; PST
* | X | zone-offset 'Z' for zero | offset-X | Z; -08; -0830; -08:30; -083015; -08:30:15;
* | x | zone-offset | offset-x | +0000; -08; -0830; -08:30; -083015; -08:30:15;
* | Z | zone-offset | offset-Z | +0000; -0800; -08:00;
* | | | |
* | p | pad next | pad modifier | 1
* | | | |
* | ' | escape for text | delimiter |
* | '' | single quote | literal | '
* | [ | optional section start | |
* | ] | optional section end | |
* | {} | reserved for future use | |
*
*
* The count of pattern letters determine the format.
*
* **Text**: The text style is determined based on the number of pattern letters used.
* Less than 4 pattern letters will use the short form (see {@link TextStyle#SHORT}).
* Exactly 4 pattern letters will use the full form (see {@link TextStyle#FULL}).
* Exactly 5 pattern letters will use the narrow form (see {@link TextStyle#NARROW}).
*
* **Number**: If the count of letters is one, then the value is printed using the minimum number
* of digits and without padding as per {@link appendValue}. Otherwise, the
* count of digits is used as the width of the output field as per {@link appendValue}.
*
* **Number/Text**: If the count of pattern letters is 3 or greater, use the Text rules above.
* Otherwise use the Number rules above.
*
* **Fraction**: Outputs the nano-of-second field as a fraction-of-second.
* The nano-of-second value has nine digits, thus the count of pattern letters is from 1 to 9.
* If it is less than 9, then the nano-of-second value is truncated, with only the most
* significant digits being output.
* When parsing in strict mode, the number of parsed digits must match the count of pattern letters.
* When parsing in lenient mode, the number of parsed digits must be at least the count of pattern
* letters, up to 9 digits.
*
* **Year**: The count of letters determines the minimum field width below which padding is used.
* If the count of letters is two, then a reduced (see {@link appendValueReduced}) two digit form is used.
* For printing, this outputs the rightmost two digits. For parsing, this will parse using the
* base value of 2000, resulting in a year within the range 2000 to 2099 inclusive.
* If the count of letters is less than four (but not two), then the sign is only output for negative
* years as per {@link SignStyle#NORMAL}.
* Otherwise, the sign is output if the pad width is exceeded, as per {@link SignStyle#EXCEEDS_PAD}
*
* **ZoneId**: This outputs the time-zone ID, such as 'Europe/Paris'.
* If the count of letters is two, then the time-zone ID is output.
* Any other count of letters throws {@link IllegalArgumentException}.
*
* Pattern Equivalent builder methods
* VV appendZoneId()
*
*
* **Zone names**: This outputs the display name of the time-zone ID.
* If the count of letters is one, two or three, then the short name is output.
* If the count of letters is four, then the full name is output.
* Five or more letters throws {@link IllegalArgumentException}.
*
* Pattern Equivalent builder methods
* z appendZoneText(TextStyle.SHORT)
* zz appendZoneText(TextStyle.SHORT)
* zzz appendZoneText(TextStyle.SHORT)
* zzzz appendZoneText(TextStyle.FULL)
*
*
* **Offset X and x**: This formats the offset based on the number of pattern letters.
* One letter outputs just the hour', such as '+01', unless the minute is non-zero
* in which case the minute is also output, such as '+0130'.
* Two letters outputs the hour and minute, without a colon, such as '+0130'.
* Three letters outputs the hour and minute, with a colon, such as '+01:30'.
* Four letters outputs the hour and minute and optional second, without a colon, such as '+013015'.
* Five letters outputs the hour and minute and optional second, with a colon, such as '+01:30:15'.
* Six or more letters throws {@link IllegalArgumentException}.
* Pattern letter 'X' (upper case) will output 'Z' when the offset to be output would be zero,
* whereas pattern letter 'x' (lower case) will output '+00', '+0000', or '+00:00'.
*
* Pattern Equivalent builder methods
* X appendOffset("+HHmm","Z")
* XX appendOffset("+HHMM","Z")
* XXX appendOffset("+HH:MM","Z")
* XXXX appendOffset("+HHMMss","Z")
* XXXXX appendOffset("+HH:MM:ss","Z")
* x appendOffset("+HHmm","+00")
* xx appendOffset("+HHMM","+0000")
* xxx appendOffset("+HH:MM","+00:00")
* xxxx appendOffset("+HHMMss","+0000")
* xxxxx appendOffset("+HH:MM:ss","+00:00")
*
*
* **Offset Z**: This formats the offset based on the number of pattern letters.
* One, two or three letters outputs the hour and minute, without a colon, such as '+0130'.
* Four or more letters throws {@link IllegalArgumentException}.
* The output will be '+0000' when the offset is zero.
*
* Pattern Equivalent builder methods
* Z appendOffset("+HHMM","+0000")
* ZZ appendOffset("+HHMM","+0000")
* ZZZ appendOffset("+HHMM","+0000")
*
*
* **Optional section**: The optional section markers work exactly like calling {@link optionalStart}
* and {@link optionalEnd}.
*
* **Pad modifier**: Modifies the pattern that immediately follows to be padded with spaces.
* The pad width is determined by the number of pattern letters.
* This is the same as calling {@link padNext}.
*
* For example, 'ppH' outputs the hour-of-day padded on the left with spaces to a width of 2.
*
* Any unrecognized letter is an error.
* Any non-letter character, other than '[', ']', '{', '}' and the single quote will be output directly.
* Despite this, it is recommended to use single quotes around all characters that you want to
* output directly to ensure that future changes do not break your application.
*
* Note that the pattern string is similar, but not identical, to
* {@link java.text.SimpleDateFormat}.
* The pattern string is also similar, but not identical, to that defined by the
* Unicode Common Locale Data Repository (CLDR/LDML).
* Pattern letters 'E' and 'u' are merged, which changes the meaning of "E" and "EE" to be numeric.
* Pattern letters 'X' is aligned with Unicode CLDR/LDML, which affects pattern 'X'.
* Pattern letter 'y' and 'Y' parse years of two digits and more than 4 digits differently.
* Pattern letters 'n', 'A', 'N', 'I' and 'p' are added.
* Number types will reject large numbers.
*
* @param {String} pattern the pattern to add, not null
* @return {DateTimeFormatterBuilder} this, for chaining, not null
* @throws IllegalArgumentException if the pattern is invalid
*/
appendPattern(pattern) {
requireNonNull(pattern, 'pattern');
this._parsePattern(pattern);
return this;
}
//-----------------------------------------------------------------------
// empty implementations of locale functionality, be implemented/overridden by js-joda-locale
appendZoneText() {
throw new IllegalArgumentException('Pattern using (localized) text not implemented, use @js-joda/locale plugin!');
}
appendText() {
throw new IllegalArgumentException('Pattern using (localized) text not implemented, use @js-joda/locale plugin!');
}
appendLocalizedOffset() {
throw new IllegalArgumentException('Pattern using (localized) text not implemented, use @js-joda/locale plugin!');
}
appendWeekField() {
throw new IllegalArgumentException('Pattern using (localized) text not implemented, use @js-joda/locale plugin!');
}
//-----------------------------------------------------------------------
_parsePattern(pattern) {
/** Map of letters to fields. */
const FIELD_MAP = {
'G': ChronoField.ERA,
'y': ChronoField.YEAR_OF_ERA,
'u': ChronoField.YEAR,
'Q': IsoFields.QUARTER_OF_YEAR,
'q': IsoFields.QUARTER_OF_YEAR,
'M': ChronoField.MONTH_OF_YEAR,
'L': ChronoField.MONTH_OF_YEAR,
'D': ChronoField.DAY_OF_YEAR,
'd': ChronoField.DAY_OF_MONTH,
'F': ChronoField.ALIGNED_DAY_OF_WEEK_IN_MONTH,
'E': ChronoField.DAY_OF_WEEK,
'c': ChronoField.DAY_OF_WEEK,
'e': ChronoField.DAY_OF_WEEK,
'a': ChronoField.AMPM_OF_DAY,
'H': ChronoField.HOUR_OF_DAY,
'k': ChronoField.CLOCK_HOUR_OF_DAY,
'K': ChronoField.HOUR_OF_AMPM,
'h': ChronoField.CLOCK_HOUR_OF_AMPM,
'm': ChronoField.MINUTE_OF_HOUR,
's': ChronoField.SECOND_OF_MINUTE,
'S': ChronoField.NANO_OF_SECOND,
'A': ChronoField.MILLI_OF_DAY,
'n': ChronoField.NANO_OF_SECOND,
'N': ChronoField.NANO_OF_DAY
};
for (let pos = 0; pos < pattern.length; pos++) {
let cur = pattern.charAt(pos);
if ((cur >= 'A' && cur <= 'Z') || (cur >= 'a' && cur <= 'z')) {
let start = pos++;
for (; pos < pattern.length && pattern.charAt(pos) === cur; pos++); // short loop
let count = pos - start;
// padding
if (cur === 'p') {
let pad = 0;
if (pos < pattern.length) {
cur = pattern.charAt(pos);
if ((cur >= 'A' && cur <= 'Z') || (cur >= 'a' && cur <= 'z')) {
pad = count;
start = pos++;
for (; pos < pattern.length && pattern.charAt(pos) === cur; pos++); // short loop
count = pos - start;
}
}
if (pad === 0) {
throw new IllegalArgumentException(
`Pad letter 'p' must be followed by valid pad pattern: ${pattern}`);
}
this.padNext(pad); // pad and continue parsing
}
// main rules
const field = FIELD_MAP[cur];
if (field != null) {
this._parseField(cur, count, field);
} else if (cur === 'z') {
if (count > 4) {
throw new IllegalArgumentException(`Too many pattern letters: ${cur}`);
} else if (count === 4) {
this.appendZoneText(TextStyle.FULL);
} else {
this.appendZoneText(TextStyle.SHORT);
}
} else if (cur === 'V') {
if (count !== 2) {
throw new IllegalArgumentException(`Pattern letter count must be 2: ${cur}`);
}
this.appendZoneId();
} else if (cur === 'Z') {
if (count < 4) {
this.appendOffset('+HHMM', '+0000');
} else if (count === 4) {
this.appendLocalizedOffset(TextStyle.FULL);
} else if (count === 5) {
this.appendOffset('+HH:MM:ss', 'Z');
} else {
throw new IllegalArgumentException(`Too many pattern letters: ${cur}`);
}
} else if (cur === 'O') {
if (count === 1) {
this.appendLocalizedOffset(TextStyle.SHORT);
} else if (count === 4) {
this.appendLocalizedOffset(TextStyle.FULL);
} else {
throw new IllegalArgumentException(`Pattern letter count must be 1 or 4: ${cur}`);
}
} else if (cur === 'X') {
if (count > 5) {
throw new IllegalArgumentException(`Too many pattern letters: ${cur}`);
}
this.appendOffset(OffsetIdPrinterParser.PATTERNS[count + (count === 1 ? 0 : 1)], 'Z');
} else if (cur === 'x') {
if (count > 5) {
throw new IllegalArgumentException(`Too many pattern letters: ${cur}`);
}
const zero = (count === 1 ? '+00' : (count % 2 === 0 ? '+0000' : '+00:00'));
this.appendOffset(OffsetIdPrinterParser.PATTERNS[count + (count === 1 ? 0 : 1)], zero);
} else if (cur === 'W') {
if (count > 1) {
throw new IllegalArgumentException(`Too many pattern letters: ${cur}`);
}
this.appendWeekField('W', count);
} else if (cur === 'w') {
if (count > 2) {
throw new IllegalArgumentException(`Too many pattern letters: ${cur}`);
}
this.appendWeekField('w', count);
} else if (cur === 'Y') {
this.appendWeekField('Y', count);
} else {
throw new IllegalArgumentException(`Unknown pattern letter: ${cur}`);
}
pos--;
} else if (cur === '\'') {
// parse literals
const start = pos++;
for (; pos < pattern.length; pos++) {
if (pattern.charAt(pos) === '\'') {
if (pos + 1 < pattern.length && pattern.charAt(pos + 1) === '\'') {
pos++;
} else {
break; // end of literal
}
}
}
if (pos >= pattern.length) {
throw new IllegalArgumentException(`Pattern ends with an incomplete string literal: ${pattern}`);
}
const str = pattern.substring(start + 1, pos);
if (str.length === 0) {
this.appendLiteral('\'');
} else {
this.appendLiteral(str.replace('\'\'', '\''));
}
} else if (cur === '[') {
this.optionalStart();
} else if (cur === ']') {
if (this._active._parent === null) {
throw new IllegalArgumentException('Pattern invalid as it contains ] without previous [');
}
this.optionalEnd();
} else if (cur === '{' || cur === '}' || cur === '#') {
throw new IllegalArgumentException(`Pattern includes reserved character: '${cur}'`);
} else {
this.appendLiteral(cur);
}
}
}
_parseField(cur, count, field) {
switch (cur) {
case 'u':
case 'y':
if (count === 2) {
this.appendValueReduced(field, 2, 2, ReducedPrinterParser.BASE_DATE);
} else if (count < 4) {
this.appendValue(field, count, MAX_WIDTH, SignStyle.NORMAL);
} else {
this.appendValue(field, count, MAX_WIDTH, SignStyle.EXCEEDS_PAD);
}
break;
case 'M':
case 'Q':
switch (count) {
case 1:
this.appendValue(field);
break;
case 2:
this.appendValue(field, 2);
break;
case 3:
this.appendText(field, TextStyle.SHORT);
break;
case 4:
this.appendText(field, TextStyle.FULL);
break;
case 5:
this.appendText(field, TextStyle.NARROW);
break;
default:
throw new IllegalArgumentException(`Too many pattern letters: ${cur}`);
}
break;
case 'L':
case 'q':
switch (count) {
case 1:
this.appendValue(field);
break;
case 2:
this.appendValue(field, 2);
break;
case 3:
this.appendText(field, TextStyle.SHORT_STANDALONE);
break;
case 4:
this.appendText(field, TextStyle.FULL_STANDALONE);
break;
case 5:
this.appendText(field, TextStyle.NARROW_STANDALONE);
break;
default:
throw new IllegalArgumentException(`Too many pattern letters: ${cur}`);
}
break;
case 'e':
switch (count) {
case 1:
case 2:
this.appendWeekField('e', count);
break;
case 3:
this.appendText(field, TextStyle.SHORT);
break;
case 4:
this.appendText(field, TextStyle.FULL);
break;
case 5:
this.appendText(field, TextStyle.NARROW);
break;
default:
throw new IllegalArgumentException(`Too many pattern letters: ${cur}`);
}
// eslint-disable-next-line no-unreachable
break;
case 'c':
switch (count) {
case 1:
this.appendWeekField('c', count);
break;
case 2:
throw new IllegalArgumentException(`Invalid number of pattern letters: ${cur}`);
case 3:
this.appendText(field, TextStyle.SHORT_STANDALONE);
break;
case 4:
this.appendText(field, TextStyle.FULL_STANDALONE);
break;
case 5:
this.appendText(field, TextStyle.NARROW_STANDALONE);
break;
default:
throw new IllegalArgumentException(`Too many pattern letters: ${cur}`);
}
// eslint-disable-next-line no-unreachable
break;
case 'a':
if (count === 1) {
this.appendText(field, TextStyle.SHORT);
} else {
throw new IllegalArgumentException(`Too many pattern letters: ${cur}`);
}
// eslint-disable-next-line no-unreachable
break;
case 'E':
case 'G':
switch (count) {
case 1:
case 2:
case 3:
this.appendText(field, TextStyle.SHORT);
break;
case 4:
this.appendText(field, TextStyle.FULL);
break;
case 5:
this.appendText(field, TextStyle.NARROW);
break;
default:
throw new IllegalArgumentException(`Too many pattern letters: ${cur}`);
}
// eslint-disable-next-line no-unreachable
break;
case 'S':
this.appendFraction(ChronoField.NANO_OF_SECOND, count, count, false);
break;
case 'F':
if (count === 1) {
this.appendValue(field);
} else {
throw new IllegalArgumentException(`Too many pattern letters: ${cur}`);
}
break;
case 'd':
case 'h':
case 'H':
case 'k':
case 'K':
case 'm':
case 's':
if (count === 1) {
this.appendValue(field);
} else if (count === 2) {
this.appendValue(field, count);
} else {
throw new IllegalArgumentException(`Too many pattern letters: ${cur}`);
}
break;
case 'D':
if (count === 1) {
this.appendValue(field);
} else if (count <= 3) {
this.appendValue(field, count);
} else {
throw new IllegalArgumentException(`Too many pattern letters: ${cur}`);
}
break;
default:
if (count === 1) {
this.appendValue(field);
} else {
this.appendValue(field, count);
}
break;
}
}
/**
* padNext function overloading
*/
padNext() {
if (arguments.length === 1) {
return this._padNext1.apply(this, arguments);
} else {
return this._padNext2.apply(this, arguments);
}
}
/**
* Causes the next added printer/parser to pad to a fixed width using a space.
*
* This padding will pad to a fixed width using spaces.
*
* During formatting, the decorated element will be output and then padded
* to the specified width. An exception will be thrown during printing if
* the pad width is exceeded.
*
* During parsing, the padding and decorated element are parsed.
* If parsing is lenient, then the pad width is treated as a maximum.
* If parsing is case insensitive, then the pad character is matched ignoring case.
* The padding is parsed greedily. Thus, if the decorated element starts with
* the pad character, it will not be parsed.
*
* @param {number} padWidth the pad width, 1 or greater
* @return {DateTimeFormatterBuilder} this, for chaining, not null
* @throws IllegalArgumentException if pad width is too small
*/
_padNext1(padWidth) {
return this._padNext2(padWidth, ' ');
}
/**
* Causes the next added printer/parser to pad to a fixed width.
*
* This padding is intended for padding other than zero-padding.
* Zero-padding should be achieved using the appendValue methods.
*
* During formatting, the decorated element will be output and then padded
* to the specified width. An exception will be thrown during printing if
* the pad width is exceeded.
*
* During parsing, the padding and decorated element are parsed.
* If parsing is lenient, then the pad width is treated as a maximum.
* If parsing is case insensitive, then the pad character is matched ignoring case.
* The padding is parsed greedily. Thus, if the decorated element starts with
* the pad character, it will not be parsed.
*
* @param {number} padWidth the pad width, 1 or greater
* @param {String} padChar the pad character
* @return {DateTimeFormatterBuilder} this, for chaining, not null
* @throws IllegalArgumentException if pad width is too small
*/
_padNext2(padWidth, padChar) {
if (padWidth < 1) {
throw new IllegalArgumentException(`The pad width must be at least one but was ${padWidth}`);
}
this._active._padNextWidth = padWidth;
this._active._padNextChar = padChar;
this._active._valueParserIndex = -1;
return this;
}
//-----------------------------------------------------------------------
/**
* Mark the start of an optional section.
*
* The output of printing can include optional sections, which may be nested.
* An optional section is started by calling this method and ended by calling
* {@link optionalEnd} or by ending the build process.
*
* All elements in the optional section are treated as optional.
* During printing, the section is only output if data is available in the
* {@link TemporalAccessor} for all the elements in the section.
* During parsing, the whole section may be missing from the parsed string.
*
* For example, consider a builder setup as
* `builder.appendValue(HOUR_OF_DAY,2).optionalStart().appendValue(MINUTE_OF_HOUR,2)`.
* The optional section ends automatically at the end of the builder.
* During printing, the minute will only be output if its value can be obtained from the date-time.
* During parsing, the input will be successfully parsed whether the minute is present or not.
*
* @return {DateTimeFormatterBuilder} this, for chaining, not null
*/
optionalStart() {
this._active._valueParserIndex = -1;
this._active = DateTimeFormatterBuilder._of(this._active, true);
return this;
}
/**
* Ends an optional section.
*
* The output of printing can include optional sections, which may be nested.
* An optional section is started by calling {@link optionalStart} and ended
* using this method (or at the end of the builder).
*
* Calling this method without having previously called `optionalStart`
* will throw an exception.
* Calling this method immediately after calling `optionalStart` has no effect
* on the formatter other than ending the (empty) optional section.
*
* All elements in the optional section are treated as optional.
* During printing, the section is only output if data is available in the
* {@link TemporalAccessor} for all the elements in the section.
* During parsing, the whole section may be missing from the parsed string.
*
* For example, consider a builder setup as
* `builder.appendValue(HOUR_OF_DAY,2).optionalStart().appendValue(MINUTE_OF_HOUR,2).optionalEnd()`.
* During printing, the minute will only be output if its value can be obtained from the date-time.
* During parsing, the input will be successfully parsed whether the minute is present or not.
*
* @return {DateTimeFormatterBuilder} this, for chaining, not null
* @throws IllegalStateException if there was no previous call to `optionalStart`
*/
optionalEnd() {
if (this._active._parent == null) {
throw new IllegalStateException('Cannot call optionalEnd() as there was no previous call to optionalStart()');
}
if (this._active._printerParsers.length > 0) {
const cpp = new CompositePrinterParser(this._active._printerParsers, this._active._optional);
this._active = this._active._parent;
this._appendInternal(cpp);
} else {
this._active = this._active._parent;
}
return this;
}
/**
* Appends a printer and/or parser to the internal list handling padding.
*
* @param pp the printer-parser to add, not null
* @return the index into the active parsers list
*/
_appendInternal(pp) {
assert(pp != null);
if (this._active._padNextWidth > 0) {
if (pp != null) {
pp = new PadPrinterParserDecorator(pp, this._active._padNextWidth, this._active._padNextChar);
}
this._active._padNextWidth = 0;
this._active._padNextChar = 0;
}
this._active._printerParsers.push(pp);
this._active._valueParserIndex = -1;
return this._active._printerParsers.length - 1;
}
/**
* Appends a string literal to the formatter.
*
* This string will be output during a print.
*
* If the literal is empty, nothing is added to the formatter.
*
* @param literal the literal to append, not null
* @return {DateTimeFormatterBuilder} this, for chaining, not null
*/
appendLiteral(literal) {
assert(literal != null);
if (literal.length > 0) {
if (literal.length === 1) {
this._appendInternalPrinterParser(new CharLiteralPrinterParser(literal.charAt(0)));
} else {
this._appendInternalPrinterParser(new StringLiteralPrinterParser(literal));
}
}
return this;
}
/**
* Appends a printer and/or parser to the internal list handling padding.
*
* @param pp the printer-parser to add, not null
* @return the index into the active parsers list
*/
_appendInternalPrinterParser(pp) {
assert(pp != null);
if (this._active._padNextWidth > 0) {
if (pp != null) {
pp = new PadPrinterParserDecorator(pp, this._active._padNextWidth, this._active._padNextChar);
}
this._active._padNextWidth = 0;
this._active._padNextChar = 0;
}
this._active._printerParsers.push(pp);
this._active._valueParserIndex = -1;
return this._active._printerParsers.length - 1;
}
//-----------------------------------------------------------------------
/**
* Appends all the elements of a formatter to the builder.
*
* This method has the same effect as appending each of the constituent
* parts of the formatter directly to this builder.
*
* @param {DateTimeFormatter} formatter the formatter to add, not null
* @return {DateTimeFormatterBuilder} this, for chaining, not null
*/
append(formatter) {
requireNonNull(formatter, 'formatter');
this._appendInternal(formatter._toPrinterParser(false));
return this;
}
/**
* Completes this builder by creating the DateTimeFormatter.
*
* This will create a formatter with the specified locale.
* Numbers will be printed and parsed using the standard non-localized set of symbols.
*
* Calling this method will end any open optional sections by repeatedly
* calling {@link optionalEnd} before creating the formatter.
*
* This builder can still be used after creating the formatter if desired,
* although the state may have been changed by calls to `optionalEnd`.
*
* @param resolverStyle the new resolver style
* @return the created formatter, not null
*/
toFormatter(resolverStyle=ResolverStyle.SMART) {
while (this._active._parent != null) {
this.optionalEnd();
}
const pp = new CompositePrinterParser(this._printerParsers, false);
return new DateTimeFormatter(pp, null, DecimalStyle.STANDARD, resolverStyle, null, null, null);
}
}
// days in a 400 year cycle = 146097
// days in a 10,000 year cycle = 146097 * 25
// seconds per day = 86400
const SECONDS_PER_10000_YEARS = 146097 * 25 * 86400;
const SECONDS_0000_TO_1970 = ((146097 * 5) - (30 * 365 + 7)) * 86400;
/**
* Prints or parses an ISO-8601 instant.
*/
class InstantPrinterParser {
constructor(fractionalDigits) {
this.fractionalDigits = fractionalDigits;
}
print(context, buf) {
// use INSTANT_SECONDS, thus this code is not bound by Instant.MAX
const inSecs = context.getValue(ChronoField.INSTANT_SECONDS);
let inNanos = 0;
if (context.temporal().isSupported(ChronoField.NANO_OF_SECOND)) {
inNanos = context.temporal().getLong(ChronoField.NANO_OF_SECOND);
}
if (inSecs == null) {
return false;
}
const inSec = inSecs;
let inNano = ChronoField.NANO_OF_SECOND.checkValidIntValue(inNanos);
if (inSec >= -SECONDS_0000_TO_1970) {
// current era
const zeroSecs = inSec - SECONDS_PER_10000_YEARS + SECONDS_0000_TO_1970;
const hi = MathUtil.floorDiv(zeroSecs, SECONDS_PER_10000_YEARS) + 1;
const lo = MathUtil.floorMod(zeroSecs, SECONDS_PER_10000_YEARS);
const ldt = LocalDateTime.ofEpochSecond(lo - SECONDS_0000_TO_1970, 0, ZoneOffset.UTC);
if (hi > 0) {
buf.append('+').append(hi);
}
buf.append(ldt.toString());
if (ldt.second() === 0) {
buf.append(':00');
}
} else {
// before current era
const zeroSecs = inSec + SECONDS_0000_TO_1970;
const hi = MathUtil.intDiv(zeroSecs, SECONDS_PER_10000_YEARS);
const lo = MathUtil.intMod(zeroSecs, SECONDS_PER_10000_YEARS);
const ldt = LocalDateTime.ofEpochSecond(lo - SECONDS_0000_TO_1970, 0, ZoneOffset.UTC);
const pos = buf.length();
buf.append(ldt.toString());
if (ldt.second() === 0) {
buf.append(':00');
}
if (hi < 0) {
if (ldt.year() === -10000) {
buf.replace(pos, pos + 2, `${hi - 1}`);
} else if (lo === 0) {
buf.insert(pos, hi);
} else {
buf.insert(pos + 1, Math.abs(hi));
}
}
}
//fraction
if (this.fractionalDigits === -2) {
if (inNano !== 0) {
buf.append('.');
if (MathUtil.intMod(inNano, 1000000) === 0) {
buf.append((`${MathUtil.intDiv(inNano, 1000000) + 1000}`).substring(1));
} else if (MathUtil.intMod(inNano, 1000) === 0) {
buf.append((`${MathUtil.intDiv(inNano, 1000) + 1000000}`).substring(1));
} else {
buf.append((`${(inNano) + 1000000000}`).substring(1));
}
}
} else if (this.fractionalDigits > 0 || (this.fractionalDigits === -1 && inNano > 0)) {
buf.append('.');
let div = 100000000;
for (let i = 0; ((this.fractionalDigits === -1 && inNano > 0) || i < this.fractionalDigits); i++) {
const digit = MathUtil.intDiv(inNano, div);
buf.append(digit);
inNano = inNano - (digit * div);
div = MathUtil.intDiv(div, 10);
}
}
buf.append('Z');
return true;
}
parse(context, text, position) {
// new context to avoid overwriting fields like year/month/day
const newContext = context.copy();
const minDigits = (this.fractionalDigits < 0 ? 0 : this.fractionalDigits);
const maxDigits = (this.fractionalDigits < 0 ? 9 : this.fractionalDigits);
const parser = new DateTimeFormatterBuilder()
.append(DateTimeFormatter.ISO_LOCAL_DATE).appendLiteral('T')
.appendValue(ChronoField.HOUR_OF_DAY, 2).appendLiteral(':').appendValue(ChronoField.MINUTE_OF_HOUR, 2).appendLiteral(':')
.appendValue(ChronoField.SECOND_OF_MINUTE, 2).appendFraction(ChronoField.NANO_OF_SECOND, minDigits, maxDigits, true).appendLiteral('Z')
.toFormatter()._toPrinterParser(false);
const pos = parser.parse(newContext, text, position);
if (pos < 0) {
return pos;
}
// parser restricts most fields to 2 digits, so definitely int
// correctly parsed nano is also guaranteed to be valid
const yearParsed = newContext.getParsed(ChronoField.YEAR);
const month = newContext.getParsed(ChronoField.MONTH_OF_YEAR);
const day = newContext.getParsed(ChronoField.DAY_OF_MONTH);
let hour = newContext.getParsed(ChronoField.HOUR_OF_DAY);
const min = newContext.getParsed(ChronoField.MINUTE_OF_HOUR);
const secVal = newContext.getParsed(ChronoField.SECOND_OF_MINUTE);
const nanoVal = newContext.getParsed(ChronoField.NANO_OF_SECOND);
let sec = (secVal != null ? secVal : 0);
const nano = (nanoVal != null ? nanoVal : 0);
const year = MathUtil.intMod(yearParsed, 10000);
let days = 0;
if (hour === 24 && min === 0 && sec === 0 && nano === 0) {
hour = 0;
days = 1;
} else if (hour === 23 && min === 59 && sec === 60) {
context.setParsedLeapSecond();
sec = 59;
}
let instantSecs;
try {
const ldt = LocalDateTime.of(year, month, day, hour, min, sec, 0).plusDays(days);
instantSecs = ldt.toEpochSecond(ZoneOffset.UTC);
instantSecs += MathUtil.safeMultiply(MathUtil.intDiv(yearParsed, 10000), SECONDS_PER_10000_YEARS);
} catch (ex) {
return ~position;
}
let successPos = pos;
successPos = context.setParsedField(ChronoField.INSTANT_SECONDS, instantSecs, position, successPos);
return context.setParsedField(ChronoField.NANO_OF_SECOND, nano, position, successPos);
}
toString() {
return 'Instant()';
}
}
/**
* Used by parseDefaulting().
* @implements {DateTimePrinterParser}
* @private
*/
class DefaultingParser {
/**
* @param {TemporalField} field
* @param {number} value
*/
constructor(field, value) {
this._field = field;
this._value = value;
}
/**
* @param {DateTimePrintContext} context
* @param {StringBuilder} buf
* @return {boolean}
*/
print() {
return true;
}
/**
* @param {DateTimeParseContext} context
* @param {string} text
* @param {number} position
* @returns {number}
*/
parse(context, text, position) {
if (context.getParsed(this._field) == null) {
context.setParsedField(this._field, this._value, position, position);
}
return position;
}
}
export function _init() {
ReducedPrinterParser.BASE_DATE = LocalDate.of(2000, 1, 1);
DateTimeFormatterBuilder.CompositePrinterParser = CompositePrinterParser;
DateTimeFormatterBuilder.PadPrinterParserDecorator = PadPrinterParserDecorator;
DateTimeFormatterBuilder.SettingsParser = SettingsParser;
DateTimeFormatterBuilder.CharLiteralPrinterParser = StringLiteralPrinterParser;
DateTimeFormatterBuilder.StringLiteralPrinterParser = StringLiteralPrinterParser;
DateTimeFormatterBuilder.CharLiteralPrinterParser = CharLiteralPrinterParser;
DateTimeFormatterBuilder.NumberPrinterParser = NumberPrinterParser;
DateTimeFormatterBuilder.ReducedPrinterParser = ReducedPrinterParser;
DateTimeFormatterBuilder.FractionPrinterParser = FractionPrinterParser;
DateTimeFormatterBuilder.OffsetIdPrinterParser = OffsetIdPrinterParser;
DateTimeFormatterBuilder.ZoneIdPrinterParser = ZoneIdPrinterParser;
}